View SIL3811_150329.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SIL3811
Serial ATA to Parallel ATA Module
SIL3811 is a Serial ATA to Parallel ATA device bridge chip. The IDE connector interfaces a Parallel ATA device. By accepting Serial ATA commands from the Serial ATA host interface, commands are decoded and converted to Parallel ATA commands and sent to the Parallel ATA device. Specifications Overall Features * Standalone Serial ATA to Parallel ATA device bridge chip * Compliant with ATA specification * Compatible with Ultra ATA/133 * Fabricated in a 0.18 CMOS process with a 1.8 volt core and 3.3 volt I/Os * 64-pin QFN with EPAD package * Transmit drive strength selectable * Supports ATAPI device * Supports ATA queued commands Connecting SIL3811
Serial ATA port
Serial ATA Features * Integrated Serial ATA Link and Phy logic * Compliant with Serial ATA 1.0a specifications * Supports Serial ATA generation 1 with transfer rate of 1.5Gb/s * Suppor ts spread spectr um in receiver
Power connector
www..net
1. Connect the module's IDE connector to the Par allel ATA drive's IDE connector. 2. Connect one end of the Serial ATA cable to a Serial ATA connector on the system board and the other end to the module's Serial ATA port. 3. Using the provided power cable (refer to the lower left figure), connect the 2-pin connector to the module's power connector. Connect the 4-pin connector to the power supply unit.
IDE connector
The IDE connector is on the reverse side. Connect to the power supply unit
Connect to the module's power connector
935-038110-000G A91200606

▲Up To Search▲

Price & Availability of SIL3811

	To Download SIL3811 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .